The stacked LVL laminated veneer lumber cannot be touched directly on the concrete floor; the board surface should not touch alkaline substances and corrosive organic solvents, such as alkalis, alkaline salts, amines, ketones, aldehydes, esters, ethers, etc. The painted surface of the frame cannot directly touch the board.
During transportation, prevent heavy objects from being placed on the plate, nor touch the plate with sharp objects; the loading and unloading of coils requires forklifts or people to be careful and light. Otherwise, it cannot be stored indoors, and should be placed in a cool, ventilated place.
The edge banding tape on the board is only used for maintenance during transportation and storage, and is temporarily used for waterproof and dustproof. The edge banding tape before the installation must be replaced with a special dust-proof tape. The special dust-proof tape has outstanding weather resistance.
LVL laminated veneer lumber must be properly lined and packaged during transportation and storage. It must not be stored in direct sunlight or rain; it must be handled with care when transporting, and the compartment must be cleaned to prevent board edges and maintenance For scratches and breaks of the film, use paper or cloth to wrap the four corners. When transporting, paper should be placed under the board to prevent scratching the board.